Siemens sinumerik CYCLE 86 " Bore 2" program example

          

                                   Sinumerik CYCLE86 used for "Bore 2" . In this cycle SPOS command used for activated oriented spindle stop , once the drilling depth has been reached. Then the programmed retraction positions are approached in rapid traverse and , from there, the retraction plane .
          This cycle is used if the spindle to be used for the boring operation is technically able to go into position-controlled spindle operation.

CYCLE 86 ( RTP , RFP , SDIS , DP , DPR , DTB , SDIR , RFA , RPO , RPAP , POSS )

 Where, RTP- Retraction plane (absolute)
             RFP- Reference plane (absolute)
             SDIS- Safety distance 
             DP- Final drilling depth (absolute)
             DPR- Final drilling depth related to reference plane .
             DTB- Dwell time at final
             SDIR - Direction of rotation
             RFA- Retraction path along the abscissa of the active plane (incremental )
             RPO- Retraction path along the  orinate of the active plane (incremental)
             RPAP- Retraction path along the boring axis (incremental)
             POSS- Spindle position for oriented spindle stop in the cycle (in degree)





HARSH.MPF
N10   G90 G71 G94 F200 ;
N20   T03 D01 M06 ;
N30   S1000  M03 ;
N40   M08 ;
N50   G00 X10 Y10  ;

N60   CYCLE 86 (10 , 0 , 3 , -15 , _ ,_  , 3 , -1 , -1 , 1 , 90 )
N70   G00 X40 Y40 ;
N80   CYCLE 86 (10 , 0 , 3 , -15 , _ ,_  , 3 , -1 , -1 , 1 , 90 )
N90   M05 M09 M30 ;
                                      More examples..........!!!!

DESCRIPTION OF PROGRAM :-

HARSH.MPF- Name of main program
N10- Absolute coordinate system , metric input command , feed rate per minute 200 ;
N20- tool change command select tool no. 3
N30- Spindle on clockwise , speed is 1000 rpm
N40-  coolant on.

N50Rapid traverse command , where tool at X and Y is  10 and 10 (first drilling position)
N60- Call CYCLE86 ( RTP=10 , RFP=0 , SDIS=3 , DP=-15 , DPR=_ , DTB=_ , SDIR=3 , RFA=-1 , RPO= -1 , RPAP= 1 , POSS=90 )
N70- Rapid traverse command , where tool at X and Y is  40 and 40 (Second drilling position)
N80- Call CYCLE86 ( RTP=10 , RFP=0 , SDIS=3 , DP=-15 , DPR=_ , DTB=_ , SDIR=3 , RFA=-1 , RPO= -1 , RPAP= 1 , POSS=90 )
N90- Spindle off , coolant off , main prog. end .

Siemens sinumerik CYCLE 86 " Bore 2" program example Siemens sinumerik CYCLE 86 " Bore 2"  program example Reviewed by Roshani Vijay sawe on September 13, 2018 Rating: 5
Powered by Blogger.