MAIN PROG description of STEP TURNING AND FACING


following are MAIN PROG description of STEP TURNING AND FACING for main program
 CLICK HERE !

 .


DESCRIPTION OF PROGRAM
Main prog file name HARSH
N2 – Tool at reference point  were X0 and Z0 .
N3 – Tool change command , select no of tool 6 , tool offset no 01 .
N4 – Spindle on clockwise at speed 1000 .
N6- Rapid command at X 27 and Z 2  . ( Tool takes position )
N7 – Linear command tool near to job at X25 and Z0  .
N8-Linear command tool touch to the job at X25 and Z-2 .
N9- Linear command cutting operation start each cut 2 mm .
X-1 and z-2  .(facing)
N10 -  Rapid command tool goes away at X 27 and Z at same place .
N11 – Tool goes rapidly at safe position at X27 and Z2 .
N12 – Tool ready at x axis for another cut linearly .
N13- Tool touch to job for next cutting linearly .
N14- Linear command cutting operation start each cut 2 mm .
X-1 and Z-4  .(facing)
N15- -  Rapid command tool goes away at X 27 and Z at same place .
N16- Tool goes rapidly at safe position at X27 and Z2 .
N17- Tool ready at x axis for another cut linearly .
N18 - Tool touch to job for next cutting linearly .
N19- Linear command cutting operation start each cut 2 mm .
X-1 and Z-6  .(facing)
N20- Rapid command tool goes away at X 27 and Z at same place .
N21- Tool goes rapidly at safe position at X27 and Z2 .
N22- Tool touch to job for next cutting linearly .
N23- Tool touch to job for next cutting linearly
N24- Linear command cutting operation start each cut 2 mm .
X-1 and Z-8  .(facing)
N25- Rapid command tool goes away at X 27 and Z at same place .
N26- Tool goes rapidly at safe position at X27 and Z2 .
N27- Tool ready at x axis for another cut linearly
N28- Tool touch to job for next cutting linearly
N29-- Linear command cutting operation start each cut 2 mm .
X-1 and Z-10  .(Facing operation end)
N30- Rapid command tool goes away at X 27 and Z at same place .
N31- Tool goes rapidly at safe position at X27 and Z2.
N32 - Tool ready at x axis for another cut linearly.
N33- Linear command cutting operation start each cut 0.5 mm .
X25 and Z-25  .(first step turning start)(means each turning cut reduce 1 mm diameter)
N34- Rapid command tool goes away at X 27 and Z at same place.
N35- Tool goes rapidly at safe position at X27 and Z2.
N36- Tool touch to job for next cutting linearly at X24 .
N37- Linear command cutting operation start each cut 0.5 mm .
X24 and Z-25  . (means each turning cut reduce 1 mm diameter)
N38- Rapid command tool goes away at X 27 and Z at same place
N39 - Tool goes rapidly at safe position at X27 and Z2.
N40- Tool touch to job for next cutting linearly at X23 .
N41- Linear command cutting operation start each cut 0.5 mm .
X23 and Z-25  . (means each turning cut reduce 1 mm diameter)
N42- Rapid command tool goes away at X 27 and Z at same place
N43- Tool goes rapidly at safe position at X27 and Z2.
N44- Tool touch to job for next cutting linearly at X22 .
N45- Linear command cutting operation start each cut 0.5 mm .
X22 and Z-25  . (means each turning cut reduce 1 mm diameter)
N46- Rapid command tool goes away at X 27 and Z at same place
N47- Tool goes rapidly at safe position at X27 and Z2.
N48- Tool touch to job for next cutting linearly at X21 .
N49- Linear command cutting operation start each cut 0.5 mm .
X21 and Z-25  . (means each turning cut reduce 1 mm diameter)
N50- Rapid command tool goes away at X 27 and Z at same place.
N51- Tool goes rapidly at safe position at X27 and Z2.
N52-  Tool touch to job for next cutting linearly at X20.
N53- Linear command cutting operation start each cut 0.5 mm .
X21 and Z-25  .( firtst step Turning end ) (means each turning cut reduce 1 mm diameter)
N54- Rapid command tool goes away at X 27 and Z at same place
N55- Tool goes rapidly at safe position at X27 and Z2.
N56-  Tool touch to job for next cutting linearly at X19.
N57 - Linear command cutting operation start each cut 0.5 mm .
X19 and Z-25  .( Second step Turning start ) (means each turning cut reduce 1 mm diameter)
N58- Rapid command tool goes away at X 27 and Z at same place
N59- Tool goes rapidly at safe position at X27 and Z2.
N60 - Tool touch to job for next cutting linearly at X18.
N61- Linear command cutting operation start each cut 0.5 mm .
X18 and Z-25  . (means each turning cut reduce 1 mm diameter)
N62- Rapid command tool goes away at X 27 and Z at same place
N63- Tool goes rapidly at safe position at X27 and Z2.
N64 - Tool touch to job for next cutting linearly at X17.
N65- Linear command cutting operation start each cut 0.5 mm .
X17 and Z-25  . (means each turning cut reduce 1 mm diameter)
N66- Rapid command tool goes away at X 27 and Z at same place.
N67 - Tool goes rapidly at safe position at X27 and Z2.
N68- Tool touch to job for next cutting linearly at X16.
N69- Linear command cutting operation start each cut 0.5 mm .
X16 and Z-25  . (means each turning cut reduce 1 mm diameter)
N70 - Tool at reference point  were X0 and Z0 .
N71- Spindle off .
N72 – Coolent off .
N73 – Main program end .

MAIN PROG description of STEP TURNING AND FACING MAIN PROG description of STEP TURNING AND FACING Reviewed by HARSHAL DHAWAS on February 18, 2018 Rating: 5
Powered by Blogger.